No need to resort to « hammer and chisel » methods that wastes time and effort.
- You’ll never again have to resort to “hammer and chisel†methods that waste time and effort. Flange spreaders should be used in pairs to provide even spreading force.
- Standard 60° wedge is suitable for most flanges; 30° “thin†and 60° “blunt†wedges are optional.
- The HFS3A is designed for applications where total thickness of flanges and max. spread gap is 3″ or less and flange bolts are a min. of 11/16″ dia.
- Use HFS6A if total thickness of flanges and max. spread gap is 6″ or less, and flange bolts are a min. of 13/16″ dia.
| Order No. |
Capacity |
Standard Wedge Type | Weight (lbs.) |
|---|---|---|---|
| HFS3A | 5 | 60° Sharp | 9.0 |
| HFS6A | 10 | 60° Sharp | 18.0 |
| Order No. | Optional Wedges |
Min. Flange Opening (in.) |
Max. Flange Opening (in.) |
Min Combined Flange Opening (in.) |
Pin Dia. (in.) |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
| 30° Thin |
60° Blunt |
60° sth. |
60° Blunt |
30° | 60° Std. |
60° Blunt |
30° | |||
| HFS3A | 350823 | 350822 | 1/16 | 1 | 1/16 | 1Â 1/4 | 1 1/4 | 23/32 | 3 1/2 | 11/16 |
| HFS6A | 350549 | 350550 | 1/16 | 1 1/2 | 1/16 | 2 | 2 | 31/32 | 6 9/16 | 13/16 |
| Catalog | |
| Operating Instructions | |
