This installer adjusts to fit bearing cups from 3 5/8″ to 6 1/2″ O.D. Replaces over two dozen plates and drivers. Simply adjust the jaws to fit the cup I.D., lock the jaws, slip the new cup on and drive it home with a hammer. Will not damage new bearings.
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 7180 | Univ. bearing cup installer. | 10.0 |
Assemble your own “custom-made†driver tools
These sets include discs and handles for custom seal driver assembly to provide a pilot (to prevent cocking), a spacer (so force is applied on the proper area) and a driver (for even force dist.). Discs range from 1/2″ thru 4 1/2″ diameters in 1/16″ increments. Each set includes a handy plastic box with pre-cut tool tray.
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 27793 | Starter Set. Contains handle and discs especially selected to provide the driver sizes most frequently needed. Maximum utility at a modest investment! | 4.0 |
| 27794 | Basic Set. Wide coverage, low investment! Includes 41 discs and two handles. Size range: 1/2″ thru 3″ diameter. | 22.0 |
| 27795 | Big Job Set. Used for servicing large components. You get coverage of 3 1/16″ thru 4 1/2″ diameter with the 24 discs and handle provided. | 45.0 |
| 27797 | Master Set. For maximum coverage. Three handle sizes and all 65 discs listed in chart at left are included. Range: 1/2″ thru 4 1/2″ diameter. | 68.0 |
| 212377 | Tool organizer board. Will accommodate all components of 27797 Master Set. Tools not included. | 5.0 |
Patent No. 4,429,447
| Order No. |
DISCS | Starter Set 27793 |
Basic Set 27794 |
Big Job Set 27795 |
Master Set 27797 |
|
|---|---|---|---|---|---|---|
| Inches | MM | |||||
| 27491 | 1/2 | 12.7 | Â |  |
 | |
| 27492 | 9/16 | 14.3 | Â | |
 | |
| 27493 | 5/8 | 15.9 | |
|
 | |
| 27494 | 11/16 | 17.5 | Â | |
 | |
| 27495 | 3/4 | 19.0 | |
|
 | |
| 27496 | 13/16 | 20.6 | Â | |
 | |
| 27497 | 7/8 | 22.2 | |
|
 | |
| 27498 | 15/16 | 23.8 | Â | |
 | |
| 27499 | 1 | 25.4 | |
|
 | |
| 27500 | 1 1/16 | 27.0 | Â | |
 | |
| 27501 | 1 1/8 | 28.6 | |
|
 | |
| 27502 | 1 3/16 | 30.2 | Â | |
 | |
| 27503 | 1 1/4 | 31.8 | |
|
 | |
| 27504 | 1 5/16 | 33.3 | Â | |
 | |
| 27505 | 1 3/8 | 34.9 | |
|
 | |
| 27506 | 1 7/16 | 36.5 | Â | |
 | |
| 27507 | 1 1/2 | 38.1 | |
|
 | |
| 27508 | 1 9/16 | 39.7 | Â | |
 | |
| 27509 | 1 5/8 | 41.3 | |
|
 | |
| 27510 | 1 11/16 | 42.9 | Â | |
 | |
| 27511 | 1 3/4 | 44.4 | |
|
 | |
| 27512 | 1 13/16 | 46.0 | Â | |
 | |
| 27513 | 1 7/8 | 47.6 | |
|
 | |
| 27514 | 1 15/16 | 49.2 | Â | |
 | |
| 27515 | 2 | 50.8 | Â | |
 | |
| 27516 | 2 1/16 | 52.4 | Â | |
 | |
| 27517 | 2 1/8 | 54.0 | Â | |
 | |
| 27518 | 2 3/16 | 55.6 | Â | |
 | |
| 27519 | 2 1/4 | 57.2 | Â | |
 | |
| 27520 | 2 5/16 | 58.7 | Â | |
 | |
| 27521 | 2 3/8 | 60.3 | Â | |
 | |
| 27522 | 2 7/16 | 61.9 | Â | |
 | |
| 27523 | 2 1/2 | 63.5 | Â | |
 | |
| 27524 | 2 9/16 | 65.1 | Â | |
 | |
| 27525 | 2 5/8 | 66.7 | Â | |
 | |
| 27526 | 2 11/16 | 68.3 | Â | |
 | |
| 27527 | 2 3/4 | 69.8 | Â | |
 | |
| 27528 | 2 13/16 | 71.4 | Â | |
 | |
| 27529 | 2 7/8 | 73.0 | Â | |
 | |
| 27530 | 2 15/16 | 74.6 | Â | |
 | |
| 27531 | 3 | 76.2 | Â | |
 | |
| 27532 | 3 1/16 | 77.8 | Â | Â | |
|
| 27533 | 3 1/8 | 79.4 | Â | Â | |
|
| 27534 | 3 3/16 | 81.0 | Â | Â | |
|
| 27535 | 3 1/4 | 82.6 | Â | Â | |
|
| 27536 | 3 5/16 | 84.1 | Â | Â | |
|
| 27537 | 3 3/8 | 85.7 | Â | Â | |
|
| 27538 | 3 7/16 | 87.3 | Â | Â | |
|
| 27539 | 3 1/2 | 88.9 | Â | Â | |
|
| 27540 | 3 9/16 | 90.5 | Â | Â | |
|
| 27541 | 3 5/8 | 92.1 | Â | Â | |
|
| 27542 | 3 11/16 | 93.7 | Â | Â | |
|
| 27543 | 3 3/4 | 95.3 | Â | Â | |
|
| 27544 | 3 13/16 | 96.8 | Â | Â | |
|
| 27545 | 3 7/8 | 98.4 | Â | Â | |
|
| 27546 | 3 15/16 | 100.0 | Â | Â | |
|
| 27547 | 4 | 101.6 | Â | Â | |
|
| 27548 | 4 1/16 | 103.2 | Â | Â | |
|
| 27549 | 4 1/8 | 104.8 | Â | Â | |
|
| 27550 | 4 3/16 | 106.4 | Â | Â | |
|
| 27551 | 4 1/4 | 108.0 | Â | Â | |
|
| 27552 | 4 5/16 | 109.5 | Â | Â | |
|
| 27553 | 4 3/8 | 111.1 | Â | Â | |
|
| 27554 | 4 7/16 | 112.7 | Â | Â | |
|
| 27555 | 4 1/2 | 114.3 | Â | Â | |
|
| Set Components Order No. |
Description | Starter Set 27793 |
Basic Set 27794 |
Big Job Set 27795 |
Master Set 27797 |
|---|---|---|---|---|---|
| 10012 | 1 /4″ – 20 UNC X 7/8″ * | |
|
|
|
| 10020 | 1 /4″ – 20 UNC X 1 1/4″ * | |
|
|
|
| 10854 | 1/4″ – 20 UNC X 1 3/4″ | |
|
|
|
| 10855 | 1/4″ – 20 UNC X 2 3/4″ * | |
|
|
|
| 12001 | 1/4″ – 20 UNC X 2 1/4″ * | |
|
|
|
| 27487 | Small Handle 5″ X 3/4″ Dia. | |
|
 | |
| 27488 | Med. Handle 6″ X 1 1/4″ Dia. | Â | |
 | |
| 27489 | Large Handle 6″ X 1 5/8″ Dia. | Â | Â | |
|
| 27490 | Extension Tube | Â | |
 | |
| 7350 | Allen Wrench | |
 |  |  |
| Â * Socket head cap screw. | |||||
These sets have the proper-size driver for any seal, bearing or bushing installing job. Select the proper-size discs, attach to handle with cap screws and strike with hammer.
| Catalog | |
