full20_30860671x386_C756
full20_35272Cylinders_C_SERIES_APPfull20_30859671x386_C106

C: 5-100T S/A

Category: .
Single-Acting, Spring-Return. Rugged and high quality general purpose cylinder used for lifting and pressing.

RUGGED, HIGH QUALITY CYLINDER USED FOR LIFTING AND PRESSING
  • Aluminum bronze bearing reduces wear caused by off-center loads.
  • Maximum sized springs speed piston return and increase spring life.
  • Solid steel cylinder body for durability.
  • Chrome plated piston rod resists wear and corrosion.
  • Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base.
  • Base mounting holes standard on 5 through 55 ton cylinders; optional on 75 and 100 ton cylinders.
  • A 3/8″ NPTF female half coupler is standard.
Order
No.		 Cyl
Cap
Tons		 Stroke
(in.)		 Oil
Cap.
(cu. in.)

Bore
Dia.
(in.)

 Cylinder
Effective
Area
(sq. in)		 Internal
Press.
at Cap.
(psi)		 Tons
at
10,000
(psi)		 Weight
(lbs.)
C51C 5 1 1.1 1 1/8 0.994 10,061 4.97 2.25
C53C 3 1/4 3.2 1 1/8 0.994 10,061 4.97 3.26
C55C 5 1/4 5.2 1 1/8 0.994 10,061 4.97 4.0
C57C 7 1/4 7.2 1 1/8 0.994 10,061 4.97 5.0
C59C 9 1/4 9.2 1 1/8 0.994 10,061 4.97 5.8
 
C101C 10 1 2.2 1 11/16 2.236 8,948 11.2 4.0
C102C 2 1/8 4.8 1 11/16 2.236 8,948 11.2 5.0
C104C 4 1/8 9.2 1 11/16 2.236 8,948 11.2 6.7
C106C 6 1/8 13.7 1 11/16 2.236 8,948 11.2 9.4
C108C 8 1/8 19.9 1 11/16 2.236 8,948 11.2 11.0
C1010C 10 1/8 22.6 1 11/16 2.236 8,948 11.2 13.0
C1012C 12 1/8 27.1 1 11/16 2.236 8,948 11.2 14.6
C1014C 14 1/8 31.6 1 11/16 2.236 8,948 11.2 16.2
C1016C 16 36.1 1 11/16 2.236 8,948 11.2 18.5
 
C151C 15 1 3.1 2 3.142 9,549 15.7 7.5
C152C 2 1/8 6.7 2 3.142 9,549 15.7 8.9
C154C 4 1/8 12.9 2 3.142 9,549 15.7 11.5
C156C 6 1/8 19.2 2 3.142 9,549 15.7 15.3
C158C 8 1/8 25.5 2 3.142 9,549 15.7 17.9
C1510C 10 1/8 31.8 2 3.142 9,549 15.7 20.7
C1512C 12 1/8 38.1 2 3.142 9,549 15.7 23.2
C1514C 14 1/8 44.4 2 3.142 9,549 15.7 26.0
C1516C 16 50.3 2 3.142 9,549 15.7 28.2
 
C251C 25 1 5.1 2 9/16 5.15 9,699 25.8 11.9
C252C 2 10.3 2 9/16 5.15 9,699 25.8 13.9
C254C 4 20.6 2 9/16 5.15 9,699 25.8 17.6
C256C 6 1/4 32.2 2 9/16 5.15 9,699 25.8 21.7
C258C 8 1/4 42.5 2 9/16 5.15 9,699 25.8 25.6
C2510C 10 1/4 52.8 2 9/16 5.15 9,699 25.8 29.3
C2512C 12 1/4 63.2 2 9/16 5.15 9,699 25.8 33.1
C2514C 14 1/4 73.5 2 9/16 5.15 9,699 25.8 36.8
 
C552C 55 2 22.1 3 3/4 11.04 9,959 55.2 32.5
C554C 4 1/4 46.9 3 3/4 11.04 9,959 55.2 41.3
C556C 6 1/4 69.0 3 3/4 11.04 9,959 55.2 51.0
C5510C 10 1/4 113.2 3 3/4 11.04 9,959 55.2 67.0
C5513C 13 1/4 146.3 3 3/4 11.04 9,959 55.2 78.0
 
C756C 75 6 1/8 97.4 4 1/2 15.90 9,434 79.5 73.5
C7513C 13 1/8 208.7 4 1/2 15.90 9,434 79.5 109.5
 
C1002C 100 2 41.2 5 1/8 20.62 9,695 103.1 63.0
C1006C 6 5/8 137.0 5 1/8 20.62 9,695 103.1 91.0
C10010C 10 1/4 211.5 5 1/8 20.62 9,695 103.1 113.0

Cylinder Caps furnished with “C” Series Cylinders
Order No. Cylinder Tonnage
201375 5
201362 10
201362 15
201412 25
36161 55
36161 75
36161 100
General Purpose C Series Cylinder (5-100 Tons) - Diagram
  A B C D E F H J K
Order No.  Re-
tracted
Height
(in.)		 Ex-
tended
Height
(in.)

Outside
Dia.
(in.)

 Collar
Thread
(in.)		 Piston
Collar
Thread
Length
(in.)		 Base
to
Port
(in.)		 Piston
Rod
Dia.
(in.)		 Piston Rod
Int. Thread
and Depth
(in.)		 Rod
Protrusion
(in.)
 C51C 4 11/32 5 7/16 1 1/2 1 1/2-16 1 1/8 3/4 1 3/4-16 x 5/8 1/4
 C53C 6 1/2 9 3/4 1 1/2 1 1/2-16 1 1/8 3/4 1 3/4-16 x 5/8 1/4
 C55C 8 1/2 13 3/4 1 1/2 1 1/2-16 1 1/8 3/4 1 3/4-16 x 5/8 1/4
 C57C 10 3/4 18 1 1/2 1 1/2-16 1 1/8 3/4 1 3/4-16 x 5/8 1/4
 C59C 12 3/4 22 1 1/2 1 1/2-16 1 1/8 3/4 1 3/4-16 x 5/8 1/4
 
 C101C 3 5/8 4 5/8 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 C102C 4 3/4 6 7/8 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 C104C 6 3/4 10 7/8 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 C106C 9 3/4 15 7/8 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 C108C 11 3/4 19 7/8 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 C1010C 13 3/4 23 7/8 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 C1012C 15 3/4 27 7/8 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 C1014C 17 3/4 31 7/8 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 C1016C 20 1/2 36 1/2 2 1/4 2 1/4-14 1 1/8 3/4 1 1/2 1-8 x 3/4 1/4
 
 C151C 4 7/8 5 7/8 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 C152C 5 7/8 8 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 C154C 7 7/8 12 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 C156C 10 11/16 16 13/16 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 C158C 12 11/16 20 13/16 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 C1510C 14 11/16 24 13/16 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 C1512C 16 11/16 28 13/16 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 C1514C 18 11/16 32 13/16 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 C1516C 20 9/16 36 9/16 2 3/4 2 3/4-16 1 1/8 3/4 1 3/4 1-8 x 3/4 1/4
 
 C251C 5 1/2 6 1/2 3 3/8 3 5/16-12 1 15/16 1 2 1/4 1 1/2-16 x 7/8 3/8
 C252C 6 1/2 8 1/2 3 3/8 3 5/16-12 1 15/16 1 2 1/4 1 1/2-16 x 7/8 3/8
 C254C 8 1/2 12 1/2 3 3/8 3 5/16-12 1 15/16 1 2 1/4 1 1/2-16 x 7/8 3/8
 C256C 10 3/4 17 3 3/8 3 5/16-12 1 15/16 1 2 1/4 1 1/2-16 x 7/8 3/8
 C258C 12 3/4 21 3 3/8 3 5/16-12 1 15/16 1 2 1/4 1 1/2-16 x 7/8 3/8
 C2510C 14 3/4 25 3 3/8 3 5/16-12 1 15/16 1 2 1/4 1 1/2-16 x 7/8 3/8
 C2512C 16 3/4 29 3 3/8 3 5/16-12 1 15/16 1 2 1/4 1 1/2-16 x 7/8 3/8
 C2514C 18 3/4 33 3 3/8 3 5/16-12 1 15/16 1 2 1/4 1 1/2-16 x 7/8 3/8
 
 C552C 6 7/8 8 7/8 5 5-12 2 3/16 1 3/8 3 1/8 None 1/8
 C554C 9 1/8 13 3/8 5 5-12 2 3/16 1 3/8 3 1/8 None 1/8
 C556C 11 1/8 17 3/8 5 5-12 2 3/16 1 3/8 3 1/8 None 1/8
 C5510C 15 1/8 25 3/8 5 5-12 2 3/16 1 3/8 3 1/8 None 1/8
 C5513C 18 1/8 31 3/8 5 5-12 2 3/16 1 3/8 3 1/8 None 1/8
 
 C756C 12 3/8 18 1/2 5 3/4 5 3/4-12 1 3/4 1 1/4 3 3/4 None 1/8
 C7513C 19 3/8 32 1/2 5 3/4 5 3/4-12 1 3/4 1 1/4 3 3/4 None 1/8
 
 C1002C 8 5/8 10 5/8 6 1/4 6 1/4-12 2 1/4 1 5/8 4 1/8 None 1/8
 C1006C 13 1/4 19 7/8 6 1/4 6 1/4-12 2 1/4 1 5/8 4 1/8 None 1/8
 C10010C 16 7/8 27 1/8 6 1/4 6 1/4-12 2 1/4 1 5/8 4 1/8 None 1/8

Cylinder Tonnage No. Holes Thread Size Thread Depth Bolt Circle
Diameter (in.)
5 2† 1/2 – 20 0.38 1.00
10 5/16 – 18 0.50 1.56
15 3/8 – 16 1.88
25 1/2 – 13 0.75 2.31
55 3.75
*Optional 75 4 3/4 – 10 1.00 4.50
*Optional 100 1-8 4.75
*Consult Factory (45° from coupler)
† 90° from coupler.

General Purpose C-Series - 5-100 Tons

Go to Accessories section for product detail:

Mounting Accessories:

  • Body Clevis
  • Cylinder Base Attachment
  • Cylinder Flat Base
  • Cylinder Mounting Plate
  • Extension Rod
  • Piston Clevis
  • Plunger Base
  • Smooth and Serrated Saddle
  • Support base
  • Swivel Caps
  • Threaded and Plain Adapter
  • Threaded Connector
  • 90º « V » Base

Cylinder Accessories:

Related Products

  • full20_30915671x386_Pwrlift1

    PM: 55-300T Heavy Equipment Jack

  • full20_28541671x386_RH503

    RH: 10-100T S/A

  • full20_30880Jacks_Maintenance_Sets_IM10E

    Maintenance Sets

  • full20_30887Lifting_Load_Rotors_Tilters_LR6000

    LR: 2000-6000lbs Tilter – Load Rotors