46 cu. in./min. Best suited for under-the-roof maintenance and production applications.
BEST SUITED FOR UNDER-THEROOF MAINTENANCE AND PRODUCTION APPLICATIONS.
- Two-speed high performance pump.
- For use with single- or double-acting cylinders at operating pressures to 10,000 psi.
- Equipped with a 1Â 1â„2 hp, 3,450 rpm singlephase, 60 Hz thermal protected induction motor that starts under full load. Noise level of 77-81 dBA.
- All equipped with a 10 foot remote control except PE462S which has a 25 foot remote control.
- 24 volt control circuit on all units with remote control.
- CSA rated for intermittent duty.
| Order No. | For Use with Cyl. Type | Description | Valve Type | Valve No. | Valve Function | Control Switch | Motor | Reservoir Usable (cu. in.) |
|---|---|---|---|---|---|---|---|---|
| PE462 | Single-Acting | Base model 11/2 hp pump with 21/2 gal. metal reservoir. | 3-Way | 9584 | Advance Return†| Remote Motor Control (10 ft.) on/off |
1 1/2 hp, 115/230 VAC* 60 Hz, Single Phase |
590 |
| PE462S††| Single-Acting | PE462, except has solenoid valve. | 3-Way | 9579 | Advance Return** | Remote Motor Valve (25 ft.) |
1 1/2 hp, 115/230 VAC* 60 Hz, Single Phase |
590 |
| PE462A∞ | Single-Acting | PE462, except has « dump valve » | Auto/Dump 3-Way |
9610 | Advance Return | Remote Motor Control (10 ft.) on/off |
1 1/2 hp, 115/230 VAC* 60 Hz, Single Phase |
590 |
| PE464 | Double-Acting/ Multi-Single Acting | PE462, except has 9500 double-acting valve. | 4-Way | 9500 | Advance Hold Return†| Remote Motor Control (10 ft.) on/off |
1 1/2 hp, 115/230 VAC* 60 Hz, Single Phase |
590 |
| PE464S††| Double-Acting/ Multi-Single Acting | PE462S, except has 9592 double-acting valve. | 3/4-Way | 9592 | Advance Return** | Remote Motor/Valve (10 ft.) |
1 1/2 hp, 115/230 VAC* 60 Hz, Single Phase |
590 |
| * Available with 220 V., 50 Hz motor (to order, place suffix “50-220†behind pump order number). Specify voltage when ordering. ** “Advance†position holds pressure with motor shut off. *** Usable oil is calculated with the oil fill at the recommended level of 1/2″ below reservoir cover plate. †“Advance†position holds pressure with motor shut off. “Return†position returns cylinder. ††115 volt, 60 Hz. †††The remote motor control switch on PE46 series pumps is 24 volt. ∞ Not to be used for lifting. When pump is shut off, oil returns to reservoir. |
||||||||
| Order No. | Max Pressure Output (psi) |
rpm | dBa at Idle and 10,000 (psi) | Amp Draw 115 V – at 10,000 (psi) |
Oil Del. (cu. in./min. @) †|
A (in.) |
B (in.) |
C (in.) |
D (in.) |
E (in.) |
F (in.) |
G (in.) |
Weight w/ Oil (lbs.) |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 (psi) |
100 (psi) |
5,000 (psi) |
10,000 (psi) |
|||||||||||||
| PE46 Series |
10,000 | 3,450 | 77/81* | 25** | 500 | 450 | 51 | 46 | 19 5/8 | 6 13/16 | 11 1/2 | 10 | 18 1/2 | 9 1/2 | 8 | 79 |
| * Measured at 3 ft. distance, all sides. ** Requires 20 amp circuit. †Typical delivery. Actual flow will vary with field conditions. |
||||||||||||||||
Go to Accessories section for product detail:
Hydraulic Pump Accessories:
| Catalog | |
| Operating Instructions | |
| Parts List | |
