full20_30927Presses_H_Frame_SPE2514
full20_58273SPA2514

SP: H Frame Open Throat 25T


Category: .
Design permits use as both H frame and C frame press.
OPEN THROAT® PRESSES

  • Cylinder can be mounted on frame extension to handle jobs which won’t fit between uprights.
  • Open Throat® press models are also available with remote control to enable the operator to view work from all sides with fingertip control of cylinder piston travel.
  • Off-center pressing loads of full capacity can be applied across entire width of frame.
  • Press bed height easily adjustable with winch. Bed will not drop when handle is released.
  • Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.Â

 

OPEN THROAT® Presses:

Order No. Cap.
(tons)
Type of
Cyl. Used
Stroke
(in.)
Cylinder
Model
Speed (in./min.)†††Type Pump Valve
Type
Pump Model †Weight
(lbs.)
Advance Pressing
SPA2514 25 Single-Acting 14 1/4 C2514C 9.8 1.2 Air 2-Way Foot PA6 683
SPM2514 25 Single-Acting 14 1/4 C2514C 0.49 in./stroke 0.03 in./stroke Hand Load-Release P159 693
SPE2514 25 Single-Acting 14 1/4 C2514C 46.6 3.3 Elec. 2-Way††PE172 665
SPE2514S 25 Single-Acting 14 1/4 C2514C 52 4 Elec. 3-Way†PE213S 759
SPE2514DS 25 Double-Acting 14 1/4 RD2514 52 4 Elec. 4-Way†PE214S 787
† Solenoid valve with 24 volt remote control hand switch.
†† Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 10′ remote motor control.
††† Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 10,000 psi: PE172–67/81 dBA; PE21–70 dBA measured
at 3 foot distance, all sides.

PUMP ELECTRICAL SPECIFICATIONS

PE17 Series
– 1/2 hp, 115 volt, 60 cycle, single phase.

PE21 Series
– 1 hp, 115 volt, 60 cycle, single phase. Both pumps available in 230 volt, 50 cycle, add suffix « -220″ to order no.

671x386_SPA2514 LA

A
(in.)
B
(in.)
C
(in.)
D *
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
J
(in.)
K
(in.)
L
(in.)
M
(in.)
Floor Space
(in.)
68 43 28 3-29 6 7/8-43 3/8 4 1/2 32 5 1/2 6 1/2 7 2 1/2 8 43 x 28
*Lateral head movement

Go to Accessories section for product detail:

Shop Press Accessories:

Related Products

  • full20_30929Presses_H_Frame_SPE20013DS

    SP: High Tonnage 150-200T

  • full20_30928Presses_H_Frame_55t_SPE5513

    SP: H Frame 55T

  • full20_33134Presses_H_Frame_100t_SPE10013DS

    SP: H Frame 100T Press

  • full20_28428Presses_C_Frame_SPM256C

    SP: C Frame 25T