- For use with single-acting or double-acting cylinders at operating pressures to 10,000 psi.
- For intermittent duty; starts under full load.
- Equipped with 1â„2 hp, 3,450 rpm, single-phase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. cord)
- Low amperage draw; small generators and low amperage circuits can be used as power source.
- Extremely quiet noise level (67-81 dBA).
| Order No. | For use with Cyl. Type | Description | Valve Type | Valve No. | Valve Function | Control Switch ††| Motor | Reservoir Usable (cu .in.) |
|---|---|---|---|---|---|---|---|---|
| PE172 | Single-Acting | Base model pump with 1/2 hp pump with 2 gal. thermoplastic reservoir. | 2-Way | 9517 | Advance Return (Auto†) | Remote Motor Control (10ft.) on/off | 1/2 hp, 110/115V* 50/60 Hz, Single Phase | 295 |
| PE172M | Single-Acting | PE172, except has 2 1/2 gal. aluminum reservoir. | 2-Way | 9517 | Advance Return (Auto†) | Remote Motor Control (10ft.) on/off | 1/2 hp, 110/115V* 50/60 Hz, Single Phase | 375 |
| PE172S | Single-Acting | PE172, has solenoid operated valve. | 3-Way | 9579 | Advance Hold Return | Remote Motor & Valve (25 ft.) | 1/2 hp, 110/115 VAC 50/60 Hz, Single Phase | 295 |
| PE172SM | Single-Acting | PE172S, except has. aluminum reservoir. | 3-Way | 9579 | Advance Hold Return | Remote Motor & Valve (25 ft.) | 1/2 hp, 110/115 VAC 50/60 Hz, Single Phase | 375 |
| PE172A∞ | Single-Acting | Best suited for crimping, punching, pressing. Not for lifting. Thermoplastic reservoir. | Auto./Dump Manifold |
45554 | Advance Return | Remote Motor Control (10ft.) on/off | 1/2 hp, 110/115V* 50/60 Hz, Single Phase | 295 |
| PE172AM∞ | Single-Acting | PE172A, except has aluminum reservoir. | Auto./Dump Manifold |
45554 | Advance Return | Remote Motor Control (10ft.) on/off | 1/2 hp, 110/115V* 50/60 Hz, Single Phase |
375 |
| PE174 | Single/ Double-Acting | PE172, except has 9500 double-acting valve. | 4-Way | 9500 | Advance Hold Return** | Remote Motor Control (10ft.) on/off | 1/2 hp, 110/115V* 50/60 Hz, Single Phase |
295 |
| PE174M | Single/ Double-Acting | Same as PE174, except has aluminum reservoir. | 4-Way | 9500 | Advance Hold Return** | Remote Motor Control (10ft.) on/off | 1/2 hp, 110/115V* 50/60 Hz, Single Phase | 375 |
| PE84 | Double- or Multi Single-Acting | PE174, except has continueous duty with 2 gal. thermoplastic reservoir | 4-Way | 9500 | Advance Hold Return** | Remote Motor Control (10ft.) on/off | 1/2 hp, 1115V* 60 Hz, Single Phase | 295 |
| * Available with 220 V., 50 Hz motor (to order, place suffix “50-220†behind pump order number).
** “Advance†position holds pressure with motor shut off. †“Advance†position holds pressure with motor shut off. “Return†position advances cylinder with motor running and returns cylinder with motor shut off. ††Control switch on PE17 series wired with line voltage. ∞ Not to be used for lifting. |
NOTE: The remote motor control switch on 220V., 50 cycle PE17 series pumps is 24 volt.
NOTE: Usable oil is calculated with the oil fill at the recommended level of 11/2″ below reservoir cover plate. NOTE: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17. ‡Some Power Team pumps are available in special configurations not listed in this catalog. For your special requirements please consult your local distributor or the Power Team factory. |
|||||||
Contact Factory for special 12V DC version for service vehicles
| Order No. | Max Pressure Output (psi) |
rpm | dBa at Idle and 10,000 (psi) | Amp Draw 115 V – at 10,000 (psi) |
Oil Del. (cu. in./min. @) †|
A (in.) |
B (in.) |
C (in.) |
D (in.) |
E (in.) |
F (in.) |
H (in.) |
Weight w/ Oil (lbs.) |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 (psi) |
100 (psi) |
5,000 (psi) |
10,000 (psi) |
|||||||||||||
| PE17 Series |
10,000 | 3,450 | 67/81* | 10 | 290 | 190 | 20 | 16 | 18 1/2 | 7 | 11 3/8 | 7 1/8 | 14 7/8 | 9 1/4 | 5 1/8 | 45 |
| PE17M Series |
10,000 | 3,450 | 67/81* | 10 | 290 | 190 | 20 | 16 | 18 1/8 | 6 5/8 | 11 1/2 | — | 14 1/2 | 9 1/2 | — | 53 |
| PE84 | 10,000 | 1,750 | 67/81* | 10 | 145 | 120 | 12 | 8 | 18 1/2 | 7 | 11 3/8 | 7 1/8 | 15 3/8 | 9 1/4 | 5 1/8 | 47 |
| * Measured at 3 ft. distance, all sides. †Typical delivery. Actual flow will vary with field conditions. |
||||||||||||||||
Go to Accessories section for product detail:
Hydraulic Pump Accessories:
| Catalog | |
| Operating Instructions | |
| Parts List | |
