55 cu. in./min. Vanguard® Series heavy duty multiple-applications pump for cylinders up to 200 Ton.
HEAVY DUTY MULTIPLE-APPLICATIONS PUMP. HEAVY CONSTRUCTION AND CONCRETE STRESSING. LOW VOLTAGE STARTING POSSIBLE.
- 1 1/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25 amps at full load, starts at reduced voltage. CSA rated for intermittent duty.
- 10 foot remote motor control (except PE552S which has a 25 foot remote motor and valve control).
- True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure.
- Reservoirs available in sizes up to 10 gallons.
- Light weight and portable. Best weight-to-performance ratio of all Power Team pumps.
- “Assemble to Order†System: There are times when a custom pump is required. Power Team’s “Assemble to Order†system allows you to choose from a wide range of pre-engineered, off-the shelf components to build a customized pump to fit specific requirements. By selecting standard components you get a “customized†pump without “customized†prices. All pumps come fully assembled, add oil and ready for work.
| Order No.*** | For Use with Cyl. Type | Description | Valve Type | Valve No. | Valve Function | Control Switch††| Motor | Reservoir Usable (cu. in.) |
|---|---|---|---|---|---|---|---|---|
| PE550 | Single-Acting | Base model 1 1/8 hp pump with 2 1/2 gal. reservoir, remote motor control | - | - | - | Remote Motor On/Off | 1 1/8 hp*, 110/115 VAC | 525 |
| PE550-RP50 | Single-Acting | Base model 1 1/8 hp pump with 5 gal. reservoir, remote motor control & 3-way valve. | - | - | - | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
1150 |
| PE552 | Single-Acting | Base model 1 1/8 hp pump with 2 1/2 gal. reservoir, remote motor control & 3-way valve. | 3-Way | 9582 | Advance Return** | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE552S | Single-Acting | PE552, except also has solenoid operated remote valve. | 3-Way | 9579 | Advance Hold Return | Remote Motor & Valve | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE552S-RP50 | Single-Acting | PE552, except also has 5 gal. reservoir, and a solenoid operated remote valve. | 3-Way | 9579 | Advance Hold Return | Remote Motor & Valve | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
1150 |
| PE552A∞ | Single-Acting | PE552, except has « Auto Dump » valve. | Auto/Dump | 9610 | Advance Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE553 | Single-Acting | 1 1/8 hp pump with 2 1/2 gal. reservoir. Valve has « Posi-Check » feature | 3-Way†| 9520 | Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE553-RP50 | Single-Acting | 1 1/8 hp pump with 5 gal. reservoir. Valve has « Posi-Check » feature | 3-Way†| 9520 | Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
1150 |
| PE554 | Double-Acting | Base model 1 1/8 hp pump with 2 1/2 gal. res. and 4-way valve for double-acting systems | 4-Way†| 9506 | Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE554-RP50 | Double-Acting | Base model 1 1/8 hp pump with 5 gal. res. and 4-way valve for double-acting systems | 4-Way†| 9506 | Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
1150 |
| PE554S-RP50 | Double-Acting | Pump equipped with 3/4-way solenoid valve and 5 gallon reservoir | 3/4-Way | 9592 | Advance Hold Return | Remote Motor & Valve | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
1150 |
| PE554W | Double-Acting | Weather-resistant model 1 1/8 hp pump with 2 1/2 gal. res. and 4-way valve for double-acting systems. | 4-Way†| 9506 | Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE554W-RP50 | Double-Acting | Weather-resistant model 1 1/8 hp pump with 5 gal. res. and 4-way valve for double-acting systems. | 4-Way†| 9506 | Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE554T | Double-Acting | PE554, except has 9500 tandem center valve. | 4-Way | 9500 | Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE554P | Double-Acting | For use with single-acting Spring Seat, Stressing Jack or double-acting cylinder. | 4-Way | 9500 | Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE554PT | Double-Acting | For use with single-acting or double-acting Power Seat, Stressing Jacks ONLY. | 4-Way | 9628 | Advance Hold Sequenced Return |
Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE554C | Double-Acting | Pump suitable to run multiple spring return tools. | 4-Way | 9511 †††|
Advance Hold Return | Remote Motor | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| PE554S | Double-Acting | Pump equipped with 3/4-way solenoid valve. | 3/4-Way | 9592 | Advance Hold Return** | Remote Motor & Valve | 1 1/8 hp*, 110/115 VAC 50/60 Hz, Single Phase |
525 |
| * Pumps available with 230 volt, 60/50 Hz motors. Specify voltage when ordering. ** Holds with motor shut off. ***To order PE55 series pumps with CSA approval, add “–C†to the Order No. †Valves have Posi-Check® feature. ††All remotes are 10 ft. long except for PE552S which is 25 ft. long. †††Valving allows alternate and independent operation of two different spring return tools. Valve holds pressure only while valve is in “A†or “B†port position with pump motor shut off. ∞ Not to be used for lifting applications. |
||||||||
| Order No. | Max Pressure Output (psi) |
rpm | dBa at Idle and 10,000 (psi) | Amp Draw 115 V – at 10,000 (psi) |
Oil Del. (cu. in./min. @) †|
A (in.) |
B (in.) |
C (in.) |
D (in.) |
E (in.) |
F (in.) |
G (in.) |
H (in.) |
Weight w/ Oil (lbs.) |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 (psi) |
700 (psi) |
5,000 (psi) |
10,000 (psi) |
||||||||||||||
| PE55 Series |
10,000 | 12,000 | 90/89* | 25 | 704 | 440 | 74 | 56 | 18 1/4 | 11 1/2 | 9 1/2 | 7 | 10 | 8 | 14 | – | 65 |
| *Noise level reading (dBA) measured at a 3 ft. distance, all sides. ** Amp draw at 10,000 psi, 230 Volts 50/60 Hz is 15 Amps. |
|||||||||||||||||
Go to Accessories section for product detail:
Hydraulic Pump Accessories:
| Catalog | |
| Operating Instructions | |
| Parts List | |
