60 cu. in./min. Designed specifically for heavy duty, extended cycle operation for up to 200 Ton.
PUMP DESIGNED SPECIFICALLY FOR HEAVY DUTY, EXTENDED CYCLE OPERATION.
- For operating single- or double-acting cylinders.
- Metal shroud keeps dirt and moisture out of motor and electrical components.
- Electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption.
- Internal relief valve limits pressure to 10,000 psi. External relief valve is adjustable from 1,000 to 10,000 psi.
- Pumps operate below maximum OSHA noise limitation (74-76 dBA).
- Start and operate under full load, even with voltage reduced by 10%.
| Order No. | For Use with Cyl. Type | Description | Valve Type | Valve No. | Valve Function | Control Switch††| Motor | Reservoir Usable (cu. in.) |
|---|---|---|---|---|---|---|---|---|
| PQ603 | Single-Acting | 2 hp pump with 5.7 gal. reservoir and manual valve, | 3-Way | 9520* | Advance Hold Return | 115V -22 amps 230V -11 amps |
2 hp, 230 Volt 60 Hz††, Single Phase |
1,250 |
| PQ603S | Single-Acting | PQ603, except has solenoid operated remote valve. | 3-Way | 9599†| Advance Hold Return | 115V -22 amps 230V -11 amps |
2 hp, 230 Volt 60 Hz††, Single Phase |
1,250 |
| PQ604 | Double-Acting | 2 hp pump with 5.7 gal. reservoir and manual valve. | 4-Way | 9506* | Advance Hold Return | 115V -22 amps 230V -11 amps |
2 hp, 230 Volt 60 Hz††, Single Phase |
1,250 |
| PQ604S | Double-Acting | PQ604, except has solenoid operated remote valve. | 4-Way | 9512†| Advance Hold Return | 115V -22 amps 230V -11 amps |
2 hp, 230 Volt 60 Hz††, Single Phase |
1,250 |
| * Manual valve. Pump is equipped with RUN/OFF/PULSE switch for control of motor. †Solenoid valve. Pump is equipped with a remote control switch with 10 ft. cord. ††PQ60 series also available in 115V, 60 Hz or 220V, 50 Hz. Please specify when ordering. Example: for 60 Hz order PQ603-115; for 50 Hz order PQ603-50-220. Power Team can “Assemble to Order†pumps with special seals, voltages, valves, relief valve settings, etc. For your special requirements please consult your local distributor or the Power Team factory. |
||||||||
| Order  No. | Max Pressure Output (psi) |
rpm | dBa at Idle and 10,000 (psi) |
Oil Del. (cu. in./min. @) | |||
|---|---|---|---|---|---|---|---|
| 100 (psi) |
1,000 (psi) |
5,000 (psi) |
10,000 (psi) |
||||
| PQ60 Series |
10,000 | 1,725 | 74/76* | 730 | 70 | 65 | 60 |
| * Measured at a 3 ft. distance, all sides. | |||||||
| Order  No. | A (in.) |
B (in.) |
C (in.) |
D (in.) |
E (in.) |
F (in.) |
G (in.) |
H (in.) |
J (in.) |
K*** (in.) |
Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PQ60 Series |
25 1/8 | 14 1/4 | 15 1/2 | 7 1/4 | 12 1/8 | 13 5/16 | 14 11/16 | 9 5/16 | 4 13/16 | 1/2-20 UNF | 169.0** |
| ** Total weight with oil and 3-way solenoid valve. Subtract 10 lbs. to obtain weight of pump with manual valve. *** For 2″ dia. swivel casters, order (4) No. 10494. |
|||||||||||
Go to Accessories section for product detail:
Hydraulic Pump Accessories:
| Catalog | |
| Parts List | |
