30-55 cu. in./min. Gasoline power supply ideal for remote locations for use with cylinders upt to 150 Ton.
GASOLINE POWER SUPPLY IDEAL FOR REMOTE LOCATIONS.
- PG30 SERIES: FOR UP TO 75 TON CYLINDERS.
- PG55 SERIES: FOR UP TO 150 TON CYLINDERS.
- A logical choice at work sites where electricity or compressed air are unavailable. For single- or double-acting cylinders at operating pressures to 10,000 psi.
- All gasoline engine/hydraulic pumps feature Posi-Check® valve to guard against pressure loss when valve is shifted from “advance†to “holdâ€.
PG303 and PG304
- Powered by a 2-cycle, 2 hp Tecumseh engine giving it the lowest weight to horsepower ratio of all gasoline driven pumps.
- Has an aluminum reservoir with 375 cu. in. of usable oil.
- Has same basic pump as PE30 series electric operated pumps.
- PG30 series pumps are equipped with roll cages to protect pump from damage.
- PG30 series pumps weigh in at only 32 lbs. with oil.
- PG303 is for single-acting cylinders, has a 9520 valve with separate internal return line; allows oil from running pump to return to reservoir, independently of cylinder return oil, when valve is in “return†position.
- PG304 is for double-acting cylinders, has a 9506 4-way (tandem center) valve.
PG553 and PG554
- 6 hp Intek “Diamond Edge†4-cycle, by Briggs & Stratton. 5 gallon reservoir.
- Same basic pump as PE55 series electrical Vanguard® pumps.
- PG553 has a 9520 3-way valve for singleacting cylinders.
- PG554 has a 9506 4-way valve for doubleacting cylinders.
| Order No. | For Use with Cyl. Type | Description | Valve Type | Valve No. | Valve Function | Reservoir Usable (cu. in.) |
Horsepower | Cycle |
|---|---|---|---|---|---|---|---|---|
| PG303 | Single-Acting | 2 hp pump with 2 gal. reservoir and single-acting valve. | 3-Way | 9520 | Advance Hold Return | 375 | 2 | 2 |
| PG553 | Single-Acting | 6 hp pump with 5.7 gal. reservoir and single-acting valve. | 3-Way | 9520 | Advance Hold Return | 1,300** | 6 | 4 |
| PG304 | Double-Acting | PG303, except has double-acting valve. | 4-Way | 9506 | Advance Hold Return | 375 | 2 | 2 |
| PG554 | Double-Acting | PG553, except has double-acting valve | 4-Way | 9506 | Advance Hold Return | 1,300** | 6 | 4 |
| ** Usable oil is calculated with oil fill at recommended level at 1/2″ below cover plate | ||||||||
TOP: PG553 and PG554Â
BOTTOM: PG303 and PG304
| Order  No. | Max Pressure Output (psi) |
rpm | Oil Del. (cu. in./min. @) |
A (in.) |
B (in.) |
C (in.) |
D (in.) |
E (in.) |
F (in.) |
Weight (lbs.) |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 100 (psi) |
1,000 (psi) |
5,000 (psi) |
10,000 (psi) |
||||||||||
| PG303, PG304 | 10,000 | 6,000 | 275* | 40 | 35 | 30 | 14 7/8 | 10 3/8 | 9 1/2 | 16 | 5 1/8 | 13 1/2 | 32.0 |
| PG553, PG554 | 10,000 | 3,600 | 480 | 75 | 70 | 55 | 22 | 18 | 12 1/2 | 8 5/8 | 16 5/8 | 20 1/4 | 120.0 |
| * First stage oil delivery from 0-400 psi @ 230 cu. in. per minute minimum. | |||||||||||||
Go to Accessories section for product detail:
Hydraulic Pump Accessories:
| Catalog | |
| Operating Instructions | |
| Parts List | |
